Used Tires Background
European Quality Standard & Inspection Protocol

Used Tyre Grading & Inspection Guide

Transparent European casing standards, 3.5-bar pneumatic test protocols, tread depth criteria, and an interactive hydraulic doubling container calculator.

Grade A (5.5mm – 8.0mm) Grade B (3.5mm – 5.0mm) 3.5 Bar Pressure Inflation Tested Zero-Scrap German Guarantee
Interactive Casing Simulator

Visual Tread Depth & Export Verdict Inspector

Drag the slider to test different remaining tread depths and see REIFTEIL's German grading classification, estimated residual mileage, and pre-shipment compliance status.

6.2 mm
2.0 mm (Scrap) 3.5 mm (Min Export) 5.5 mm (Grade A) 8.0 mm (New)
Official Classification GRADE A — PREMIUM EXPORT

German Grade A: Deep premium European tread. Symmetrical wear, zero repairs, fully pressure-tested at 3.5 bar. Ideal for high-end retail and matching pair resale.

Pre-Shipment Status: 100% Export Ready (SONCAP, GSA, BESC)
Residual Mileage: 35,000 – 55,000 km remaining
Zero-Defect Quality Control

German 6-Point Inspection Protocol

How REIFTEIL guarantees zero scrap and consistent quality on every container loaded at our warehouses.

Step 01

3.5-Bar Pneumatic Pressure Test

Every tyre is mounted to an automated test hub and inflated to 3.5 bar (50 PSI). This instantaneously reveals hidden internal bead leaks, cord delaminations, and sidewall bubbles.

Step 02

4-Point Digital Tread Depth Check

Calibrated electronic depth verniers measure inner, center, and outer grooves across 4 circumferential points to confirm symmetrical wear and guarantee the minimum depth threshold.

Step 03

Bead Cord Integrity Verification

Physical manual and tactile inspection of inner and outer tire bead lips. Any casing with torn rubber, exposed steel wires, or rim-mounting stress damage is strictly rejected.

Step 04

Sidewall & Weather Crazing Filter

Casings are inspected under high-lumen inspection lamps. Any deep ozone weather cracks, dry rot, structural cuts, or plug repairs exceeding European safety standards are eliminated.

Step 05

Pair & 4x Set Brand Matching

Casings are sorted into matching axle pairs (2x) and full vehicle sets (4x) by premium European brands (Michelin, Continental, Bridgestone, Goodyear, Pirelli, Hankook).

Step 06

Safe Hydraulic Doubling / Tripling

Using precision pneumatic tyre spreaders and nesting machines that protect casing bead angles from over-crimping, maximizing container payload without cord deformation.

Freight Optimization Calculator

Hydraulic Packing & Ocean Freight Savings Simulator

Hydraulic nesting doubles or triples the unit count in the exact same container, cutting freight per tire drastically.
Simulation Results

Freight Cost per Unit & Savings

Total Tyres Loaded 2,205 Tyres
Freight / Tyre $1.90
Freight Saved / Unit $2.10 / tyre
Total Ocean Freight Savings vs. Loose Loading: $4,630
Est. Landed Cost / Tyre: $16.60
Ready to book an inspected container? Request Used Tyre Container